Do These Two Things To Keep Your Refrigerator Working Well

Your refrigerator is one of the most important appliances in your home. However, if you are like a lot of people, you don't pay much attention to your fridge until it stops working. Before anything happens to your refrigerator, use these tips to keep it working like it should.

Clean the Condenser Coils

When is the last time you saw the coils on the back of your refrigerator? If you are similar to most people, you probably haven't seen the back of your refrigerator in a while. However, it's a good idea to check out the condenser coils that are typically located there.

Your refrigerator's condenser coils keep heat out of the interior of the appliance so that your food can remain cool. When you don't clean these coils, dust and other debris settle on the coils and they don't work as efficiently. That may lead to premature wear and tear on your refrigerator and cause it to malfunction. If your refrigerator never seems cold enough or your food seems to spoil more quickly, dirty condenser coils could be the reason for that.

To avoid problems and keep your fridge working properly, clean the coils on a regular basis. All you need to do this is to unplug the refrigerator, get a hard-bristle brush or an old toothbrush, and then brush any debris off of the coils. If you like, you might also try using the handheld attachment on your vacuum to suck up any dust.

Change the Door Gasket, If Needed

You might recognize your door gasket as the rubber seal that helps keep your refrigerator stay shut. When the gasket is working properly, the air in your refrigerator stays cool. However, when the gasket is ripped or torn, warm air can creep into the refrigerator and your food won't stay as fresh. The refrigerator will have to work harder to maintain a cool temperature. To avoid this, look for signs of damage, mold or condensation on your gasket and replace it if you need to.

If you do need to replace your door gasket, you can purchase a pre-cut seal at a local home improvement store. To remove the existing gasket, you need to take it off the retainer, which you can see clearly if you pull the gasket back. Simply unscrew the retainer screws and peel the old gasket away from the retainer. Then you can put the brand new piece on the retainer and make sure the retainer screws are tightened again.

With the tips in this article, you can make sure your refrigerator continues to function as it's supposed to. If you notice anything that could be a problem, get in touch with a Langley appliance repair company that can assess the condition of your fridge and make any needed repairs.

Share